PULL. LOCK. RETRACT.
Secure the Load. Skip the Strap Mess.

This dual-end retractable tie-down automatically stores excess webbing, so you can secure motorcycles, pickup cargo and outdoor gear without untangling loose straps.

Stop Untangling a Pile of Webbing Before Every Trip

Ordinary tie-downs twist together in the truck bed, take time to roll after every use, and leave long webbing tails flapping in the wind. This innovative solution pulls out only the length you need, locks where you need it, and retracts the rest.

Pull Out What You Need. Retract What You Don't.

Both ends of the strap extend and retract independently, so unused webbing stays inside the housing instead of hanging loose around the load.

Benefit: Faster setup, cleaner storage, and no more manual rolling after a long haul.

Adjust From Both Sides for Easier Ratchet Access

Because both strap ends can extend, you can position the ratchet where it is easiest to reach instead of being forced into one fixed location.

• More anchor options: Pull webbing from either end to reach compatible tie-down points.
• Better tensioning: Operate the ratchet from a more comfortable angle.
• Versatile fit: Adjust usable length to match different cargo sizes.

Built for Real Hauling Jobs

This system uses durable polyester webbing and a reinforced ratchet with a listed 1650 lb break strength.

At a glance: 16.4 ft / 5 m working length · 1 in webbing width · locking coated S-hooks.

Load note: 1650 lb is break strength, not a working load limit. Always follow the product label, vehicle ratings, and anchor point guidelines.

Stay Connected With Locking S-Hooks

The large locking S-hooks include integrated safety clips to help reduce accidental disengagement, while the coated exterior helps reduce scratching on compatible anchor points.

Benefit: More secure connection, less surface wear, and more confidence while hauling.

One System for Multiple Hauling Jobs

• Motorcycles: Use rated anchor points to secure compatible bikes during trailer or pickup transport.
• Pickup Cargo: Keep boxes, totes, and equipment organized in the truck bed.
• Camping Gear: Hold coolers, storage boxes, and packed outdoor equipment in place.
• Kayaks & Boats: Suitable for compatible paddlesports and trailer tie-down tasks.
• ATVs: Useful for compatible powersports transport.

Benefit: One versatile set can replace a pile of ordinary tie-downs.

Four Steps From Loose Cargo to Secured Load

1. Hook one side to a rated anchor point.
2. Extend from the opposite side and attach the second hook.
3. Let the excess webbing retract into the housing.
4. Ratchet the load to the correct tension.

Benefit: Your tie-down routine becomes quicker, simpler, and much less frustrating.

Auto-Retract vs. Ordinary Ratchet Straps

The auto-retract design stores excess webbing inside the housing; ordinary straps must be tied or rolled after every use.

• Excess webbing: Retracts into housing vs. must be tied or rolled.
• Storage: Compact and organized vs. tangled pile.
• Ratchet position: More adjustable vs. limited by fixed layout.
• Cleanup: Automatic retraction vs. manual rolling.

Technical Specifications

• Product Type: Dual-End Retractable Ratchet Tie-Down
• Webbing Width: 1 in
• Listed Length: Approx. 16.4 ft / 5 m
• Break Strength: Up to 1650 lb
• Webbing Material: Durable Polyester
• Retraction: Dual-End Automatic Retraction
• Ratchet Position: Adjustable / Lockable Along Usable Length
• Hooks: Large Coated S-Hooks with Integrated Safety Clips
• Pack Options: 1-Pack / 2-Pack / 4-Pack
• Suggested Uses: Motorcycles, ATVs, Kayaks, Boats, Pickup Cargo & General Hauling

Packaging Options

Choose the pack that fits your hauling frequency:

• 1-Pack: Keep one for occasional cargo runs and quick securing tasks.
• 2-Pack: Set up two-point stability for moderate loads and trailers.
• 4-Pack: Secure all four corners for motorcycles, ATVs, and larger hauling jobs.

Check Before Every Trip

• Inspect before use: Do not use webbing, hooks, or ratchet mechanisms that are cut, worn, bent, or damaged.
• Use rated anchor points: Only connect to secure points capable of handling the intended load.
• Recheck during transport: Stop and verify tension after loading and periodically during longer trips.
• Protect sharp edges: Avoid routing webbing across surfaces that may cut or damage the strap.

Frequently Asked Questions

• Do both ends retract?
  Yes. Both sides extend and return into the housing for easier positioning and storage.
• What does 1650 lb mean?
  It is the listed break strength, not a working load limit.
• Can it be used for motorcycles?
  Yes, with suitable rated anchor points and proper tie-down guidance.
• Do the hooks lock?
  Yes. The large coated S-hooks include safety clips to help prevent accidental disengagement.
• Does it automatically tighten the load?
  No. It retracts slack; you create final tension with the ratchet.
• Can it be used for lifting or suspending loads?
  No. Use only as a cargo tie-down system, never for lifting, hoisting, or supporting people.

Pull It. Lock It. Haul With Less Hassle.

Secure your cargo, let the excess webbing disappear, and keep your tie-down setup organized from truck bed to storage.

Choose Your Pack →

HOW TO PAY